Electronics & Display FT520 Batch Control   The FT500-Series is a batching flow processor with additional output controls. It is designed for use with Seametrics flow meters and flow sensors, as well as other manufactuer’s products which have frequency output proportional to flow. In addition to batch functions, the FT500-Series indicates flow rate, and other data in large 3/8” (9.66 […]

WJ-SERIES Turbine flow Meters   GENERAL INFORMATION WJ-Series turbine meters are dry-register mechanical totalizers that offer accurate, economical reading of high flows with low pressure loss. The horizontal-axis turbine drives a vertical shaft, which is magnetically coupled to the sealed register. In addition to mechanical totalizing, registers can be equipped with magnetic pulse reed sensors well suited for remote totalizing, […]

IP80 Mechanical flow Meters   The IP80-Series are impeller (or “paddlewheel”) insertion meters designed for use with a wide variety of liquids in pipe sizes 1/2″ to 8″. Sensors are available in brass, 316 stainless steel, PVC, and polypropylene. Bodies are machined from a solid rod for maximum precision. High-quality jewel bearings and nickelbound tungsten carbide shafts are used for […]

TX80 Insertion Turbine Flow meters GENERAL INFORMATION Seametrics inser flow meters The TX80-Series are insertion turbine meters designed for use in 1-1/2″ to 8″ pipe. High-quality jewel bearings and precision shafts ensure long life and low friction. Available in 316 stainless steel, brass and PVC, sensor bodies are machined from solid rod for maximum low-flow performance. The TX80-Series use special […]

TX100/200 Insertion Turbine Flow meters   GENERAL INFORMATION Seametrics Insert flow meter The TX100/200-Series are adjustable depth insertion turbines that come in brass or 316 stainless models to fit 3” to 40” pipe. Installation fittings are standard 1-1/2″ (101/201) or 2” (115/215) FNPT. Fittings such as saddles and weldolets may be purchased either locally or from Seametrics. Ruby bearings and a […]

Turbine Flow meters FEATURES • One moving part • Low friction jewel bearings • Field repairable without removal from the line • Choice of materials for chemical compatibility • Variety of displays and control APPLICATIONS • Water treatment • Wastewater treatment • Cooling water monitoring • Industrial fluid control GENERAL INFORMATION This unique system of 2″ to 8″ Seametrics turbine […]

PE02 Low Flow Electromagnetic flow meters The PE102 magmeter is designed for low-flow chemical injection or difficult-to-meter applications with pulsating metering pumps in 3/4” to 1/4” pipe/tube. The housing is made of sturdy splashproof HDPE plastic.   With no moving parts, the PE102 flow meter can handle fluids containing particulate matter without clogging or jamming, keeping maintenance at a minimum. With no […]

EX115/215 SERIES Insertion Electromagnetic Flow meters • Isolation valve allows installation and removal under pressure • Useful in large water utility pipe and other applications where shutdown is not an option • EX115 fits pipe from 3″ to 10″ • EX215 fits pipe from 10″ to 48″ • Meter extends only about 1/8 of pipe diameter, minimizing potential for clogging […]

EX100/200-SERIES Insertion Electromagnetic Flow meters GENERAL INFORMATION The complete lack of moving parts of the EX100/200-Series insertion flow sensor is the source of its reliability. Brass and stainless steel models withstand a variety of temperature, pressure, and chemical conditions. The EX-Series has no rotor to stop turning in dirty water and there are no bearings to wear out. Like all […]

EX-80 Insertion electromagnetic flow meters EX800-Series insertion electromagnetic flowmeters are designed for use with conductive liquids in 1 to 12” pipe. A choice of materials (stainless steel, brass, and PVC) allows the meter to adapt to a range of temperature, pressure, and corrosive environments. The EX80 is highly suitable for difficult applications with changing viscosities and pulsating flows, such as […]