Seametrics FLow Meter SEB LOW
GENERAL INFORMATION
SEB
Low Flow Meter
The SEB is a plated brass low flow meter suited for clean water. It is available in 1/2” and 3/4” thread, with union-type meter couplings for easy installation and service. This meter is ideal for flow rates between 0.2 and 18 GPM. The SEB has only one moving part, the propeller.
A 5-30 Vdc current sinking pulse output makes the SEB ideal for many industrial control applications. This signal interfaces easily with programmable logic controllers and computer input boards. SEB meters can also be used in conjunction with the Seametrics FT420 flow computer for reading flow rate and total flow, or AO55 for 4-20 mA output. For metering pump pacing applications, a standard PD10 pulse divider is recommended.
FEATURES
- Single-jet meter
- Compact brass body
- Union couplings
- Easy installation and maintenance
- Interfaces with many controls and displays
APPLICATIONS
- Industrial control operations
- Low flow situations
- Clean water
SPECIFICATIONS
Sensor | GMR 5-30 Vdc current sinking pulse |
Fittings | 1/2”, 3/4” male NPT union couplings |
Materials Body | Nickel-plated brass |
Rotor Chamber | Brass |
Rotor | Thermoplastic |
Shaft | Tungsten carbide |
Bearings | Water-cooled thermoplastic |
Maximum Temperature | 185˚ F (85˚ C) |
Maximum Pressure | 175 psi (12 bar) |
Cable | #22 AWG 3-cond, 12’
Maximum run 2,000’ (610 m) |
Flow Range |
1/2”: 0.2 – 10 gallons per minute |
3/4”: 0.2 – 18 gallons per minute | |
Standard K-Factor | 1/2”: 550 pulses per gallon |
3/4”: 330 pulses per gallon | |
Accuracy | +/- 1% of full scale |
Regulatory | Mark |