Seametrics Flow Meter SES, Stainless Single-jet Meter
GENERAL INFORMATION
SES
Stainless Single-Jet Meter
The SES single-jet meter provides accurate, wide range flow metering in an extremely rugged stainless steel package. Single-jet simplicity combined with high quality jewel bearings results in long life and relatively high tolerance for problem fluids. Typical applications are chemical batching, proportional chemical injection, fertilizer injection, proportioning of spray chemicals, and general flow rate monitoring. The sensor is easily replaced from outside the meter, and is compatible with most of the Seametrics indicators and transmitters, as well as most controls and PLC’s that accept DC inputs. The standard rotor is PVDF (Kynar) and the shaft is a special nickel-bonded tungsten carbide. The optional ceramic shaft increases resistance to some concentrated chemicals. The standard O-ring is Teflon-coated Viton, with EPDM and Kalrez optional for compatibility with a variety of chemicals.
FEATURES
• Accurate at low flows
• Simple and durable
• Rugged body
• High tolerance for problem fluids
APPLICATIONS
• Low flow monitoring
• Chemical batching
• Proportional chemical injection
• Fertilizer injection
SPECIFICATIONS
Connection Ports | 1/2”, 3/4”, and 1” female NPT thread (SAE optional) |
Sensor Cable | 18 feet standard (Maximum cable run 2000 ft.) |
Materials Body | 316 stainless steel |
Rotor | PVDF (Kynar) |
Shaft | Nickel-bonded tungsten carbide (ceramic optional) |
Bearings | Ruby ring and ball |
O-Ring | Teflon-coated Viton (EPDM or Kalrez optional) |
Cover | 316 stainless steel |
Maximum Temperature | 200˚ F (93˚ C) |
Maximum Pressure | 500 psi (35 bar) |
Accuracy | +/- 1% of full scale |
Power | 5-24 Vdc, 2 mA min |
Outputs | Current sinking pulse, 6 – 24 Vdc |
FLOWRANGE
Model # | *K-Factor (Pulses Gal) | Gal/Min | Liter/Min |
-050 | 535 | 0.1 – 10 | 0.38 – 38 |
-075 | 390 | 0.2 – 15 | 0.75 – 57 |
-100 | 220 | 0.5 – 25 | 1.9 – 95 |
DIMENSIONS
Size | NPT Thread Size | A | B | C |
1/2 inch | 1/2 inch | 4.10 | .82 | 1.04 |
3/4 inch | 3/4 inch | 4.10 | .82 | 1.04 |
1 inch | 1 inch | 5.00 | .75 | 1.00 |