TDS-100Y Compact Ultrasonic Flow Meters   In Line Ultrasonic FLow Meters Compact Ultrasonic FLow Meter Integral Ultrasonic Flow Meter TDS-100Y ultrasonic flow meter /heat meter:, it make the main board of TDS12 or TDS18 connect to a 20 lines 4 keys parallel port keyboard monitor, then encapsulate them in a sealed enclosure, realize on-line display and operation on spot. It […]

 Dual Chanel Ultrasonic meter FEATURES – Stratified fluid piping design for two-channel measurement, measurement accuracy – Range than the width, and less than 0.01m / s starting flow – Display large amount of information, with the screen display 9 digital display four cumulative flow and instantaneous flow figures – Design of energy-saving, power-saving features such as automatic meter will empty […]

        TDS 2000 FLOW DETECTOR               SPECIFICATIONS   Range of scanning 0mm ~10000 mm Resolution for scanning 0.1mm (2.5mm ~100mm) / 1mm (100 mm ~5000mm) Range of gain 0dB ~110 dB D-Delay -20μs～+3400μs P-Delay 0μs～99.99μs Sound speed 1000 m/s～15000m/s Temperature -10℃~40℃ Humidity 20%～90%RH Power supply Li battery 7.4V 4800mAh Overall dimension […]

China Ultrasonic Flow Meters Dalian Ultrasonic Flow Meter china was established in 1996. Our firm is a high technology company which specializes in design, manufacture and development. TDS-100 series of ultrasonic flow meters / calorimeters / water meters are widely used in the oil, chemical, metallurgy, water conservancy, heating, and boiler industries. Our products are exported to the United States, […]

MFI Insertion Mass Flow Meters   MFI series insertion mass flow meters are designed for gas monitoring and control in a large pipe line where installation of an in-line flow meter is either difficult or costly. The insertion meters are equipped with a self-sealed valve and hence provide a solution that only requires minimal interruption to the normal working circumstance. […]

MF5200 Oxygen Flow Meters MF5200 series oxygen flow meters are specially designed for oxygen metering system in a hospital. These meters are operated with the standard industrial user interfaces (RS485), and user defined alarm functions for better monitoring or control over the network. The off-the-shelf products (MF5212 and MF5219) are for gas flow measurement of 0 ~ 300 SLPM and […]

MF5600 Gas flow meters   MF5600 series mass flow meters are specially designed for applications where the display is often required to be placed separated away from the flow channel or meter body, such as the oxygen metering system in a hospital. These meters are opted with the standard industrial user interfaces (RS485 and 4 ~ 20mA), and user defined […]

MF5000 Series Gas Flow Meters   MF5000 series mass flow meters are specially designed for small pipe flow monitoring and control. The series can measure gas flow in a pipe diameter as small as 3 mm, but not over 19 mm. With the self-flow conditioning feature of the MEMS sensor package, the meters feature an extremely low pressure loss compared […]

MF4000 Series Mass Flow Meters   MF4000 series mass flow meters are designed for applications where manifold flow measurements. The standard flow channels are 3 mm and 8 mm in diameter, respectively. Plastic finishing with an easy change of the mechanical adaptors enables applications at a low cost and different environments. The meters can be used for process gas control, […]

MF-GD Low Pressure mass flow meters   MF-GD series low pressure mass flow meters are designed for all low pressure industrial gas metering and control. The meters substantially reduce the installation cost as well as other logistical cost. In addition, the all electronic meters provide easy data access as well as remote data networking capabilities.